No Sound From Receiver To Speakers

No sound from receiver to speakers. You’ve set up your favorite speakers correctly. All of the wires have been attached with care, and all of the hardware has been turned on. After that, you press the “start” button on the sound device, but still, nothing occurs.

So aggravating!

But hold off on tossing your controller against the door frame.

Consider following troubleshooting techniques rather than having your fresh new audio system up and running. You may notice that while you may see images on TV, no sound is originating from any of your device’s loudspeakers.

We’ll go through how to examine your options, silence, and connections, including double-checking your wiring. However, the problem is inconvenient, and it might be produced by a defective or weak wire, which is readily rectified.

No Sound From Receiver To Speakersfix no sound from receiver to speakers

The methods below will assist you in resolving the most frequent issues.

When attaching or removing electrical wires, immediately switch off the power from the system and accessories.

Next, after every step, switch the electricity back on to ensure that everything is working correctly. Keep the sound down and avoid damaging your hearing once the sound is turned on.

This must take about half an hour and can be completed by anybody with a basic understanding of receivers.

Fix Receiver No Soundfix receiver no sound

Examine the electrical system

Check if all connections are securely inserted in their terminals, as a wire often can fall out midway and fail to draw current.

Verify that every wall button that controls outlets is turned on.

Check that all of the components in the system, along with any electrical outlets or surge protection, can switch on.

If it’s not working, try it using a different outlet that you know will work. Here is a guide on why Multiple electrical outlets not working.

Consider the audio options

Speaker B is a button on several radios that allows you to add extra loudspeakers. Verify that the sound sources are chosen and also that the appropriate ones are permitted.

Make sure the speaker cables are in good shapespeaker cables are in good shape

Examine and check every wire that connects the Receiver to the speakers, paying more attention to any broken or weak connectors.

Examine the exposed terminals to check that adequate padding has been removed.

Furthermore, double-check that the speaker cable connections are correctly placed and placed far enough into the speaker ports to create a stable connection.

Observe the speakers

Attach the speakers to the next functional sound source if feasible to guarantee that they continue to function correctly.

The speakers may be broken or faulty if they still don’t work. If they start playing, reattach them to the device.

Inspect the parts of the sourceobserve the speakers

To begin, check any source part you’re utilizing with another functional TV or pair of speakers. If the gadget still doesn’t play, the issue will most probably be with the device itself.

Plug all source parts into the authentic

Receiver and enable them to playback some input if they’re in excellent working order. Here on the Receiver, go through each input signal one at a time.

The cords linking the part to the Receiver might be the issue if the Receiver operates with specific input sources and not in others. Repair any suspicious wires before attempting to use the simple device.

This was all about the main steps you should apply. Still, if it doesn’t work, then we are here with another quick solution:

How To Fix A Speaker With No Soundhow to fix a speaker with no sound

  1. Ensure that the Receiver and all analog inputs are turned on.
  2. Plug the cords to the receivers, loudspeakers, and input sources’ appropriate incoming and outgoing ports.
  3. Ascertain that the input devices are capable of producing sound.
  4. Check to see if your Receiver’s sound or master level dial is adjusted to Volume Minimum.
  5. To pick the input device you want to listen to, click the input key on the controller or turn the input, choosing the knob on the Receiver.
  6. Ensure your Receiver or input receiver isn’t linked to your earphones.
  7. Choose an option apart from the off speaker system from the Receiver’s Speaker systems key.
  8. To turn off the silence feature, click the silence key on the tv remote. Check the Receiver’s screen for the word Silencing.

This was all for this topic, i.e.


This is the end of this article. In this post, we have discussed how to fix a receiver with no sound and fix a speaker with no sound in detail.

In this article, we have also mentioned two legit solutions; you can apply the second solution if the first one doesn’t work.

No Sound From Receiver To Speakers

Related Guides