How To Remove Velcro From Wall. Velcro consists of two strips of nylon fiber. These two strips are to be joined together to close one or two things.
They can mostly be spotted in places like bags and pockets. They are used quite a lot. It is known as hook and loop fasteners due to its ability to hook two things together.
Velcro is also used on walls. This is due to their easy use and low mess. You do not have a mess of tape because of using velcro.
You won’t have to use nails to hang your frames or pictures. But we might need to use the wall for something else, so we remove it.
How To Remove Velcro From Wall
There are multiple ways and steps to use these ways for the removal of Velcro from the wall. You can do it with the help of a knife. You just need to push the surface of the Velcro a bit up.
Then start peeling with the help of the knife. Be sure to do it slowly. While peeling, do not use too much force the paint might be damaged.
After removing the whole thing, use a cotton swab that is moistened to remove any adhesive that might be on the wall.
Ways to remove Velcro
The ways or methods to remove Velcro from the wall have been identified and then listed down with the steps to use them.
Removal with heat
Using heat to remove Velcro from the wall is a great way to do it. Heat can be sued to dissolve any type of adhesive.
Things you will need
- Hairdryer
- Hest Gun
- Knife
- Steam cleaner
Steps to follow
- Turn on the heat gun or the hairdryer.
- Use the heat emitted by it to soften the VELCRO on the wall.
- Use a knife on the edges to lift the VELCRO up.
- Peel the VELCRO off while heating.
- Repeat the steps on the other walls.
Removing with remedies like WD40
Home remedies are a great way to remove the Velcro from the wall as well.
Things to gather
- Cooking oil
- WD 40
- Water
- Lighter fluid
- Knife
Steps to follow
- Check the surface of the wall.
- Select a remedy according to the surface of your wall.
- Make sure to test it in a small area to be safe.
- If it is okay, then apply the material with water to the taped wall.
- Do not rush it and let the solvent dissolve for some time.
- After waiting, use a knife to remove the tape like before.
- Keep applying the solvent to the sticky adhesive remaining on the wall.
- Repeat the step several times so that no tape remains on the surface of the wall.
Removal using alcohol
Another method that might be able to catch your attention is using alcohol.
Things to gather
- Rubbing Alcohol
- Knife
- Water
- Sponge
- Cotton Slab
Steps to follow
- First, get some rubbing alcohol.
- Pour it into a spray to apply it.
- Add some water to it.
- Spray it on the Velcro.
- Let the alcohol get dissolved.
- Wait for about 20 minutes for a good result.
- Use a knife to lift the Velcro up.
- Peel with the help of a knife.
- Apply the alcohol again.
- Make sure to remove all the adhesives.
- Clean it later with a sponge or cotton swab.
Some Tips and Tricks
- A hairdryer is an alternative to a heat gun as well as a steam cleaner. You can use it if you do not have a heat gun at your place.
- A hairdryer is much more effective on glass or plastic surfaces.
- Always remember to apply the heat for a limited time. Too much heat can damage the place you are applying the heat on.
- If you do not have a special remedy at home. You can always apply cooking oil.
- Using a spray to pour the remedy is really effective.
- Clean the surface afterward to make sure it is safe.
FAQs
Is heat a good method to remove velcro adhesive?
Yes, heat is one of the best methods to remove the adhesive from the wall. It is easy to use and is cheap as well. You can use any source of heat available in your house.
What is the best method to remove velcro from the wall?
The method depends upon the surface and location of the wall. You can use any suitable method but I recommend the use of heat as it is my personal favorite.
Conclusion
How To Remove Velcro From Wall. The best methods to remove the velcro from the wall have been discussed in the article above.
You can choose any one of the methods but remember to choose the method that is suitable to the area and surface of the wall.
Related Guides
