How to keep brushed nickel faucets from spotting

How to keep brushed nickel faucets from spotting. When we talk about sleek and on-trend designs, then Nickle faucets make them on the top.

Things change over the year; from wood faucets to sleek double faucets, now brushed nickel faucets make the list and leave it all behind for now.

Brushed Nickle faucets are made up of Nickle and zinc and have slightly warmer tones, and stains show up in these tones easily.

They are not resistant to dirt spots but resistant to water spots.

These faucets are commonly used in kitchens and bathrooms; we use kitchens more often, so clean kitchen faucets make a clear effect on the kitchen’s environment.

As nickel Faucets are beautiful and resistant to rust, stains work easily on them.

There are there brushed channels that give them a more textured and antique look. But the finish of brushed nickel faucets is sensitive, and stains don’t come out easily.

How to keep brushed nickel faucets from spottingkeep brushed nickel faucets from spotting

It is quite easy to clean brushed Nickle faucets if you maintain your cleaning routine. Here are some ways that you can use to maintain your cleaning routine for brushed Nickle faucets.

1. Dry faucets after use

If brushed Nickle faucets are not water-resistant, then they will most likely leave stains of water droplets.

This problem is often faced by those people who live in areas where the humidity level is pretty much high.

The best way to clean these stains of water is to dry your faucets right after use.

Dry them using a soft cloth and move them in a round direction, and then buffing at the end will give them a good shiny finish.

If you make a proper routine of drying brushed Nickle faucets after use, then it will prevent forming of calcium and keeps them from spotting.

2. Remove hard water stains with a clement solution

You can remove hard water stains using solutions like vinegar or soft dishwashing detergent. This process will help to remove calcium resistance caused by hard water.

Make sure to flush off the solution with a good flow of water from the brushed Nickle faucet.

Leaving this type of detergent solution can calumniate the mixture if you will leave it for over 30 minutes.

3. Use warm water

It is highly recommended to use warm water instead of cold water on the brushed Nickle faucet because cold water will make mineral particles harder and make the stain darker than before, which will be a trouble to clean.

4. Make a cleaning routine

It is highly recommended to make a proper cleaning for brushed nickel faucets. Because it will keep them away from spots.

You can use vinegar mixed with water and some detergents to remove these spots but make sure to dry the brushed Nickle faucets after cleaning and rinsing them with water and later buffing them using a hairdryer to give them a shiny ending.

5. Wax the faucet:

Applying a layer of wax on your brushed Nickle faucet will not only make them a shiny finish but also stop them from forming minerals and their particles.

You don’t need to apply a layer of wax more often unless you want an extra shiny faucet.

6. Purchase a water softener system

If you are living in an area with a more humid environment, then your water must be hard, so it is highly advisable to buy a water softener system.

Buying a water softener will save you money on buying mineral water gallons.

It’s surely going to be a worthy purchase.

Common Mistakes to Avoid Cleaning brushed Nickle Faucetcommon mistakes to avoid cleaning brushed nickle faucet

Here are some general guidelines to follow when using cleaning products on your brushed nickel fixtures

1. Avoid cleaning with extreme solutions

Always use caution when using household cleaners on your brushed nickel faucets.

While most of the time, it will be tough enough to tackle difficult stains, you should never use any abrasive or harsh chemicals for cleaning as they can damage or ruin the finish.

This includes ammonia, scouring pads, steel wool, and direct vinegar solutions.
Instead, use mild dish soap, baking soda, or diluted vinegar to clean brushed nickel faucets.

2. Don’t use Rubbing pads on brushed nickel Faucet

Do not make the mistake of using rubbing pads to clean the brushed Nickle faucet or for any reason.

Because rubbing pads will make your brushed Nickle faucet even worse, and it will even make your faucet foggy and will remove that sleek matte finish with permanent scratches that you can even remove easily later on.

Always use soft cloth or dryer sheets or wipe them out softly. And make sure not to use any harsh object or any harsh substance to clean your brushed Nickle faucet.

3. Dab off acidic substances

If anything acidic fell on your brushed nickel faucet, then wipe it off as quickly as you can.

Now you are thinking that what type of acidic substances we are talking about, then here we are talking about juices like grape juice and fruit juices, which contain a bit acidic minerals, and well, how we can forget about coffee?

We should be cautious that what we are drinking while we are around our faucets. If something drips on your brushed nickel faucet, then clean it with vinegar or with detergent.

4. Don’t leave sponges near the brushed nickel faucet

Do not leave a damped sponge near your brushed Nickle faucet because it will lead to dropping a harsh stain on the faucet, which will become difficult to remove.

This mostly happens around the areas where the environment is a bit damped, mostly around washrooms.

Make sure to make a proper cleaning routine to maintain the sleek mate finish of yo brushed Nickle faucet.

Related Guides