How to fix garage door cable. When your garage door system isn’t working efficiently, that may be because of the cable component. Do you know how to fix it all by yourself?
If not! Then let’s have a view of some practical techniques for repairing the garage door cables. Remember, this can be dangerous as well. Fix the cable when you are sure and confident about it.
Here are some handy tips that will help fix your garage door cable.
How to fix garage door cable
Many reasons can be there for the garage door not to work efficiently.
If any of the below signs exists, this may indicate a fault in the cables.
- If the springs and motor are functional and still the garage door seems to be stuck, the problem is within the cable.
- The garage door may face leaning because of the loose cables.
- It Results in ending up unbalancing the door.
- The garage door may shut too quickly, indicating the culprit is broken or damaged cables.
- Loosely hanging garage doors are another indicating factor for damaged cables.
Identify the Cable Type
Once you find it, the issue lies in the cable component.
Check the type of cable in your garage door system that needs repairing.
Types of cables
- Torsion spring cables or lifting cables
- Torsion springs
- Extension spring cables
- Safety cables
Identify the Cable Problem
There might be many causes why the garage door cables are not working accurately. Check for any of the below issues and then try to fix them.
- Broken cable
- Cable slips
- Unwound cable
- Fraying cables
Once the reason is recognized, it’s easy to repair the cables.
Tools
Prerequisites
- Wrench
- C-Clamps
- Leather gloves
- Locking pliers
- Rags
- Safety glasses
- Socket/ratchet set
- winding bars
- Cordless drill
- Hammer
- Wrench set
- Pliers
Materials needed
- Bottom bracket
- torsion springs
- Lift cables
Fix garage door cable Procedure
- Start by opening the garage door manually by pulling the emergency release handle and trying to lock it in place.
- Another method to hold the garage door is the use of vice grips.
- Held the door by placing it below the bottom roller.
- Try losing the screws to unwind all the springs to remove tension.
- Take a wrench and lose all the screws of the drum. Loosening the screws will remove the cable from the drum.
- Let’s remove the bottom bracket cable by using socket wrenched.
- When all the old cables are displaced, start placing the new ones in the following sequence.
- Take the new cable and attach it to the bracket portion.
- Then wind around the drum.
- To tighten the cable, rotate it in an anticlockwise direction.
- The final step comprises screwing all the screws back into place.
Fixing Loose Garage Door Cables
- Sometimes the problem may be because of loose cables.
- Close the garage door. If gaps persist between them, you need to tighten the loose cables.
- Open the garage door manually by securing it with clamps.
- Look for the pulley and wind the cable around it tightly.
- Or try adjusting the cable bracket to tighten the loose cables.
Remember, for bracket cables. Three pliers are in demand. You can then reengage the door by closing it and pulling the red cord.
Once the old damaged cable gets replaced, try replacing the other as well to ensure equal length.
The reason behind this is that the new and old cables might not be the same.
Later, it can create many issues.
Garage door cable repair cost
If you need to repair your garage door cables, expect to spend $145 on average. Most homeowners pay between $85 and $200 for both parts and professional labor.
Garage door cables loose when door is open
The torsion spring is one of the most common types of springs. If your door has this spring, it probably has either one or two of them.
If these coils snapped, the cables would come loose and fall to their natural resting position, pulling up on the garage door so that it comes crashing down.
Conclusion
If the garage door gets stuck then, look for the cables either they are damaged or loosened. Try fixing them by replacing or tightening the cables.
Related Guides
