DIRECTV genie not working in one room. Do you know what the coolest part about DIRECTV is? You can enjoy your videos in any of the rooms through any of your devices. Isn’t it worth deserving of watching your favorite show lying in bed after a long tiring day?
But if DIRECTV Genie stopped working in the middle of the show, that would be the most significant inconvenience. Now you are only left with the option to solve it on your own.
Below are some of the most straightforward fixes that you can do at your home before you invest your money in asking for expert help.
DIRECTV genie not working in one room
Initially, if your DIRECTV Genie is not working in one room, you must restart the DVR.
Make sure you are going with the correct input. Now reset the receiver and inspect the connection wires.
Moreover, it would help if you also investigated the faulty remote before you contacted the service center.
Cable connections are one of the most common issues.
Because HDMI cables link genie and TV, lost or defective connections or damaged wires are possible.
Another major issue could be your Wi-Fi, which may not deliver consistent signals from the internet.
It’s also possible that there’s a problem with your internet preventing your genius from connecting to it. Aside from these two cases, errors can occur for a variety of other reasons.
Restart your Device
One of the first solutions you should try is restarting the device. To be clear, restarting your device entails turning it off, unplugging the power cord for at least 3 minutes, and then turning it back on.
In this manner, the device restarts all services known to resolve errors and conflicts.
Check for the power connection
To ensure that there is no interference, inspect the cable and turn on your DIRECTV wireless.
If there is no power to the device, it is most likely that the Genie Mini wireless is not working.
Check the receiver light if you recently had a power outage and your DIRECTV Genie is the source of the problem.
If it does not work despite being plugged in, it may be dead.
Inspect a Stable Network Connection
Check that the network to which your DIRECTV Genie Mini is connected is operational.
We’re talking about a local network here, so there’s no need for internet, but the local network can fail, which means the devices connected to it can’t communicate with each other.
Restart your Wi-Fi router to ensure a fresh start and a stable local network.
If none of the above suggestions solve your DIRECTV Genie Mini problem, it means that the issue is more complicated than a simple mistake and that it is time to try some troubleshooting methods.
Check for HDMI Issues
The most recent forum discussions demonstrate how frequently HDMI connection affects the performance of DIRECTV Genie Mini.
As a result, a thorough examination can assist you in identifying HDMI issues.
We recommend that you test your HDMI cable and, if necessary, connect it to another device to ensure that it is in good working order.
You can also click it to a different location on your receiver or TV to confirm no issues with the HDMI embedding.
Check for any obstacle
It is pronounced if you recently moved your equipment and DIRECTV Genie no longer works in one of the rooms but did in the previous one.
Remove any impediments to the recipient’s interaction, or your genius will be unable to interact with them. If your Genie is too far away from the receiver, it will be unable to receive transmission signals.
Restart the TV and main DVR
An overload on your Genie DVR/receiver may be preventing it from working correctly. You may need to restart Genie to counteract this.
Restarting your device allows it to erase all data preventing it from connecting and gives it a boost. You can skip this step if the receiver is in your room.
Inspect the remote
When it comes to remote control issues, the solution works for both Genie and Genie Mini. Begin by checking the remote-control batteries to see if they are in good working order.
If not, you can replace the ones that are the most inconvenient. Check that the remote control’s buttons are firmly pressed and that the light turns on when you press them.
If nothing else works, you might want to consider replacing the remote control.
Conclusion
If any of the steps following the troubleshooting of DIRECTV Genie remote not working aren’t helping, you should contact the operator or connect with customer support.
You can contact them through chat or on call, too, explain your issue to them, and they will guide what should be the further steps. They will take a closer step and will instruct you on how to get rid of the problem.
DIRECTV Genie Not Working in One Room
Related Guides
