Glacier bay dual flush toilet keeps running. A dual-flush toilet is a great option for saving water and making your home more environmentally friendly.
By giving you the option of a half rinse or full rinse at your discretion, you can reduce your water consumption while still getting the job done.
However, like all toilets, they can present problems that make the toilet not work as it should. A common problem with double flush toilets is constant operation.
Let’s find the solution if your
Glacier bay dual flush toilet keeps running
You hear the tank constantly filling up, even when it should be finished and full.
If your double flush toilet is running constantly, first check the top three issues that are causing this problem:
Flapper or seal problem
The fin or seal is often the culprit for constant running water in normal and double flush toilets. Over time, this piece of rubber can become brittle or simply misaligned.
To check, turn off the water supply and flush the toilet to empty it of water. Remove the remaining water with a sponge or towel.
You will then need to remove the canister from the flush valve to access the seal. Once you have found the seal, check for cracks in the seal. If there are, you will need to replace them.
If not, check to see if it can be realigned to fit well in place.
Some owners find that applying a little petroleum jelly to the seal can renew it, making it flexible and functional again for a time at least.
Sometimes the water supply isn’t as clean as we think. Or, dust and dirt may be able to enter the toilet, causing the fill valve to malfunction.
To check it, turn off the water supply and remove the lid from the fill valve.
Then, look for any debris and remove it. You may also consider brushing out the valve with a small brush. Once you’re certain it is clean, recap the valve and check if the problem has been solved.
Broken Zip Tie
The fill valve in most dual flush toilets has a zip tie to keep the base of the fill valve in place. If the fill valve isn’t strongly secured, it can cause the toilet to run. Sometimes these ties wear out or break before the rest of the device does.
You’ll need to replace a broken zip tie with a new one if you find that it’s broken. If possible, you can place two zip ties on the fill valve to assure that the base doesn’t wobble, causing the leak.
Many times these problems are easy for the average homeowner to check for and repair.
In the case that you are not able to find a solution to your dual flush toilet’s constant running, then you’ll need to call in the help of a professional plumber.
A high-quality plumbing company will be able to help you troubleshoot your dual flush toilet troubles and make sure it’s functioning properly again.
Glacier Bay Dual Flush Toilet Keeps Running Fixed