Dyson not holding charge. Don’t worry about thinking that you will have to clean the surface with the old means of cleaning like a broom and dustpan.
First of all, check the wire of the charger because there are chances that it is broken due to which the vacuum cleaner is not possessing the charge.
The next thing is to make sure that the outlet in which you have plugged in the dyson is working properly.
There is no issue of power or tripped circuit breaker to the outlet. You can also ensure by trying to plug in the cleaner in some other outlet in the home.
If the vacuum cleaner is not still holding the charging then there could also be an issue with the battery pack or the charger of the cleaner.
They can be faulty with wear and tear. If you will not clean its filters and all parts then surely the efficiency level of charging will also decrease.
Dyson not holding charge
Dyson vacuum cleaner is a good handy electrical appliance and modern means of cleaning all types of surfaces in no time.
It is designed in such a way that it changes continuously so that you can clean the carpet or floor at any time of the day.
But it is a very bad situation if you inspect that the cleaner is not holding the charge.
Mostly it is due to the not proper maintenance of the device. Here are all possible causes of this issue with a vacuum cleaner.
The charging wire is damaged
If the charging wire of the Dyson becomes damaged then it will not charge the cleaner accurately. The broken wire will create intermittent power issues.
First of all, inspect the wire with a close eye. Check if there are any signs of wear and tear on it. Sometimes it is broken due to bending and exposure of the wires.
Now if you found it broken then do not use it and replace it in no time.
An issue with the outlet
It is very important to check the power outlet before converting the dyson into parts for a complete inspection. Maybe there is an issue with the outlet and it is not getting power.
Check the circuit breaker box to see the breaker of the outlet. You can also try the vacuum cleaner in some other outlet. If still the device is not holding charge then you can look for other options.
The battery is old
The normal warranty of the battery of the dyson is a maximum of two years but you can use it for many years. With the time due to the usage, its efficiency to hold the charge will go decreasing.
If your dyson cleaner’s battery is too old and it has dropped its charging capacity then it is better to replace the battery with the new one.
One other possibility is that the battery is damaged. Inspect the battery closely, if you see the cracks on it then also replace the battery.
The new battery will surely hold the charge and you can easily clean the carpet at any time.
The charger is broken
If you have replaced the battery recently and still the battery is not holding charge then the culprit could be the charger.
The charger of the vacuum is may be broken due to water damage or a short circuit. You have no other option than to buy a new charger for the dyson to charge it properly.
Clean the filter
It is very necessary to clean the airflow and the filter of the vacuum cleaner regularly. If there will be dust and blockages on the filter then the charging power will affect it.
For cleaning the filter detach it from the vacuum carefully and then clean it with the cold water. Clear all debris and dust from it with the help of soap.
After cleaning it completely shale it will remove the water from it. Leave it for one day to dry out fully. After it dries out completely refix it to the vacuum and try to start the vacuum. Hopefully, now the Dyson will hold the charge.
The bottom line of the article is that if the Dyson vacuum is not holding a charge for a long time then mostly it is an issue of the broken wire, faulty charger or the battery is damaged due to old age and wear and tear.
Also, it is important to maintain the cleaner by cleaning its all parts regularly.