Dishwasher rinse aid dispenser not working

Dishwasher rinse aid dispenser not working. A dishwasher is an electrical appliance used in the kitchen to wash the utensils and dishes for safe energy and time. If you deeply look at the dishwasher then you will see two components in the unit.

The first compartment is for soap powder and the second is for rinse aid which is very essential for the efficient washing of the dishes. Rinse aid basically washes the dishes smoothly and removes all the stains from them.

It is a very frustrating condition if the dishwasher rinse aid dispenser stopped working because you can not get the clean dishes now. These are some main causes of malfunctioning of the rinse aid dispenser of the dishwasher.

  • The rinse aid section is dirty
  • Dispenser is faulty
  • Insufficient level of water in the unit
  •  Rinse aid cap is loosened
  • The rinse aid section is damaged
  • The Wax motor of the unit is defective
  • The door spring is damaged

Dishwasher rinse aid dispenser not working

dishwasher rinse aid dispenser not working

If the dishwasher dispenser is not functioning then you can inspect it in this way.

  • Separate the unit from the power by unplugging it from the outlet.
  • Find the dispenser in the dishwasher because you don’t need to separate it from the unit.
  • Check for any sign of damage or crash on the appliance.
  • Take a wet cloth and remove the mold and debris from the inside of the unit.
  • If you see any damage then you will have to replace the dispenser.

1. The rinse aid section is dirty

The first thing to do whenever your dishwasher dispenser stopped working is proper cleanliness.

Open the compartment of the rinse aid when there are no dishes in it and clean the food, stains, dirt, etc. It is better to use the vinegar and water solution to wash the dispenser.

2. Dispenser is faulty

If the rinse aid is not dispensing after running the cleaning solution then there are chances that the dishwasher dispenser is faulty. It is clogged from the inner side, or it has some electrical issue.

You can detach the dispenser to inspect that can you clear the blockage from it. If it is blocked then you will see the sludge beneath the dry part which is stopping it from dispensing.

3. Insufficient level of water in the unit

It is very important to fill the sufficient level of water in the unit because if the water is low then it can not stop the rinse aid from distributing. If the water level will be low then it will not mix the detergent in it to wash the utensils.

So ensure that there is enough amount water in the unit to dispense the rinse aid for proper cleaning of dishes.

 4. Rinse aid cap is loosened

rinse aid cap is loosened

The most necessary part of the rinse aid dishwasher dispenser is to wash its cap. If the cap is properly cleaned and safe from the crack then it will stop the rinse aid from dripping out of the unit.

So firstly, detach the cap and clean it properly with the help of wet fabric. If you see any type of build-ups on the cap then remove them. There must be no dirt, debris, and soap foam on the cap.

5. The rinse aid section is damaged

The basic function of the rinse aid section and dispenser is to allow the washing powder into the dishwasher during the time of the running cycle. Sometimes the rinse aid section is damaged or cracked due to any reason then it will not continue its work.

You will have to return it with a new section. It is not a difficult job so you can also replace it by yourself and save the cost.

6. The Wax motor of the unit is defective

In new models of the dishwasher, a wax motor is installed by the manufacturers to open the door and free the cleansing powder. If the wax motor becomes defective it will not open the door to let out the detergent.

It behaves like an alternator when operated by the control of the unit and the piston runs the system that will free the lock for the door of the dispenser.

If the motor failed to its function then you will have to fix the wax motor in the appliance.

7. The door spring is damaged

If the unit is not distributing the cleansing powder still then there is a problem with the door sprig of the appliance. the door of the unit is fixed with a spring and is held in the shut position by a latch.

If there is a problem with the door spring then you will need to fix a new door spring in the appliance to start the rinse aid dispenser.

Conclusion

The final thoughts on this article are that if the Dishwasher rinse aid dispenser not working then there are several reasons beyond it but the most important is its proper cleaning from each part of the dishwasher dispenser.

If there is dust and debris on any part like cap, wax motor, door spring or any of the component is damaged then replace that faulty component.

Related Guides

Leave a Comment