Whirlpool refrigerator not cooling or freezing. Whirlpool offers a reliable refrigerator; it is a warehouse of traditional, sleek-looking, and vast storage refrigerators. These high-quality and worth-buying refrigerators keep the food chilled for longer.
Sometimes this efficient refrigerator stops cooling and freezing, and there are chances that your food will get spoiled. Therefore, you need to find a solution to enable the fridge to start cooling and freezing. Do you want to know what issues can lead your whirlpool refrigerator to lead this problem?
Dirty condenser coils are the primary cause for a Whirlpool refrigerator not cooling or freezing, but there are many other reasons, too. To get information about them, go through the article, and troubleshoot the issue.
Let’s begin without any delay!
Whirlpool refrigerator not cooling or freezing
Condenser Coils are Dirty. Whirlpool Refrigerator, not Cooling or Freezing, could be an issue in coils located under the refrigerator. The condenser vanishes heat as refrigerant passes through them, but if the condenser coils are dirty, they won’t dissipate the heat properly.
Solution: If you find dirt and debris on cold, you need to wipe out our to enable the condenser to dissipate heat.
Condenser Fan Motor
If the condenser fan motor is not working correctly, the refrigerator won’t cool because it draws air through the condenser coils and over the compressor. First, check the fan blade for obstructions to determine the fan motor. If the blade is not spinning correctly, then replace the motor.
The starts relay and start winding work together to activate the compressor, but if the start relay is defective, the compressor will fail to run or may not run at all.
Due to a faulty start relay, the refrigerator will not be cold enough; hence you need to replace the start relay.
Temperature Control Thermostat
If the temperature regulating thermostat is not working correctly, it may affect the refrigerant system from working.
So, fix it or replace it to set the temperature accordingly to control the cooling temperature.
The start capacitor offers a boost of power to the compressor during start-up, but if the start capacitor isn’t working, the compressor will not start, and the refrigerator will not get cold.
Tip: You can use a multi-meter to check the parts of refrigerators whether they are working or not; thus, you can easily replace that part to make your refrigerator start cooling.
Main Control Board
If the above-mentioned hacks are not working, check the main control board; might you find that defective, rare but possible though!
If you find Whirlpool Refrigerator not Cooling or Freezing, check all the components properly and replace them if you find any of them defective. If non of the part is faulty, then go for the main control board and see any error; otherwise, contact the mechanic for service.
Whirlpool Refrigerator – Not cooling – Overload / Start Relay- Diagnostic & Repair
Here is a guide How to reset a refrigerator compressor
Check here if Ge refrigerator water dispenser not working