Whirlpool ice maker not working but water dispenser is

Whirlpool ice maker not working but water dispenser is. We’ve grown obsessed with having ice available when we require it, but what tends to happen if the ice maker breaks down? Don’t call a service technician just yet; we’ll demonstrate to you how to fix an ice maker that isn’t working, even if the water dispenser is.

We anticipate our appliances to function when needed, but things occasionally malfunction and an ice machine is everywhere. Examine to see if the ice maker’s shut-off arm is in the off condition. To properly make ice, turn the shut-off arm to the on position.

To fix it, open the ice maker, look for debris in the water filter, and clean it.

Read on to get more.

Whirlpool ice maker not working but water dispenser iswhirlpool ice maker not working but water dispenser is (solved)

Your ice maker could cease working for a variety of reasons. If the water dispenser is still operational, this could be a problem. Fortunately, the majority of the issues are simple to resolve.

Problems with the Ice Maker

  • The ice maker must be reset.
  • The control arm has been turned off.
  • The door switch is malfunctioning.
  • The water filter is full of clogs.
  • The temperature isn’t quite cold enough.
  • The ice maker’s water line is frozen.
  • The water intake valve is malfunctioning.

Some of these issues are simpler to resolve than others. We’ve listed the remedies for each of these below to assist you in determining what’s incorrect and how to solve it.

Temperature not Cold Enough to Freeze Ice

The temperature of the freezer is the next item on the agenda. It’s possible that the temperature isn’t adjusted low sufficient to freeze the ice properly.

It may be due to a damaged thermostat. First, double-check that your freezer’s temperature is set to 0 or 5 degrees Fahrenheit.

For food to be safe to store and eat, it must be frozen. Anything that isn’t completely frozen could indicate that your freezer isn’t set too low sufficiently.

You may check this by feeling the food in your freezer to see if it is solidly frozen.

Control Arm Turned Positioncontrol arm turned position

If your ice machine stops operating, it could be due to anything as easy as the well being mistakenly switched off. Make sure the control arm is in the down position by looking for it.

Check your user’s manual if you’re not sure which position is on or off. You’d be astonished how frequently this happens, and turning it back on can spare you money on maintenance that wasn’t necessary for the initial instance.

Bad filterbad filter

It’s possible that your water filter has blocked or, worse, gone rotten. Don’t worry; it’s a simple remedy. When the water filter becomes clogged or becomes defective, it restricts water flow to the ice maker.

Water will still be dispensed from your water dispenser, albeit at a reduced rate.

If your water dispenser operates but the flow is feeble, your ice maker may be running out of water. Locate your water filter and clean or replace it as needed.

Check your user’s handbook for information on where to find it and how to clean it. You may also have to seek the filter’s precise part number. Here you can check some of Best aftermarket refrigerator water filter.

Some more issues

If you’ve gone through the troubleshooting and worked through all of the difficulties above and nothing has worked, you may be dealing with something more serious. The ice maker’s motor may have failed. You’ll either need a new motor or an entirely new ice maker in this situation.

Some ice producers use a laser to determine when the tray is empty, but these can malfunction. To ensure that the laser is functioning correctly, you must test it.

Some Whirpool ice makers have a module as well. The icemaker module power is supplied to the water inlet valve, which must be replaced if it fails.

Conclusion

We talked about how the whirlpool icemaker isn’t operating, but the water dispenser is. Whirlpool refrigerators are generally dependable, but they are prone to malfunctioning.

The ice maker can stop working even if the water dispenser is on for various reasons, including a clogged filter. Let’s look at how to get your ice maker working again, whether it was the closed arm or the filter.

Related Guides

Leave a Comment