Thompson water seal does not dry

Thompson water seal does not dry. Protecting your outdoor surfaces against brutal or harsh climate changes and water watering effects can boom their life span. While utilizing the right items can go far in aiding help your home’s check advance.

Thompson water seal is the most common product used by numerous people to waterproof their outer surfaces against sun exposure. Shockingly, the defensive coat now and then takes a long duration to even think about drying. But if it is not drying properly, you need to know the reasons behind this.

Read this article to know why Thompson’s water seal does not dry and solutions to fix these issues.

Thompson water seal does not drythompson water seal does not dry 2022

In most cases, high humidity levels or excess rain can make the Thompson water seal take more drying time, or maybe you have applied the excess amount of seal to the surface if you already have one coat on it.

Insufficient drying time can also cause problems, and maybe the weather is too cold to make the drying process possible.

There are various reasons that can make Thompson water seal waterproofed stain stay tacky longer than anticipated. This segment will analyze the most common criminals to watch out for:

Higher humidity levels

A high level of humidity means an excess amount of moisture in the atmosphere around your house. This sort of circumstances hinders drying by making it hard for the particles of your sealant to escape into the air.

In the end, you will notice that your freshly coated surface remains tacky, even taking the entire 24 hours of drying time. But fortunately you the drawn-out drying time won’t influence the power of your sealant.

Less drying time

According to the manufacturers, the drying time for Thompson’s water seal is 24 hours. Comprehend that this time allotment is an approximated figure, and your freshly coated surface needs more time to dry properly.

So make sure that your surface has enough time to dry before assuming that something isn’t right with the surface. 

Few clients panic even earlier before 24 hours pass, and this type of reaction is usual among those who skip reading the instructions written on the product packaging. So to achieve better results, make sure you have to go through all the instructions and wait patiently.

Again Sealing a sealed surface

In some cases, people may not realize that surface already have any coat on it as the used sealant may be colorless before applying the Thompson water seal on the surface.

And in this case already coated surface won’t have open pores for the Thompson water seal to enter. As a result, the Thompson sealer will remain tack on the surface of the previous coat, and in this case, if your deck fails to dry, you can assume that your surface is already coated with water sealant.

How to fix Thompson water seal problems?

Remove the extra amount of product

Sometimes people mistakenly apply an excess amount of water seal on the surface, so if you have done it, wipe out the excess amount as soon as you notice to avoid future inconvenience.

Give your deck sufficient drying time

If the weather is excellent and the atmosphere has extra moisture, your various reasons can excessive deck may take a few extra days or maybe a weak. So in such a situation, you should wait patiently up to a weak.

Use a fan

You can use a fan to speed up the drying process and accelerate the ventilation. The fan will improve the air circulation around the surface and help the sealant particles absorb the air quickly.

Related Guides

Leave a Comment