Homemade underground pipe locator. You might wonder why it is so necessary to locate the water lines in your backyard or on just about any piece of land.
Well, if you are about to do some construction or digging up in the area, knowing where potentially damaging water pipes are can be crucial to the success of any project you’re investing time and money in.
Think of it as a vital safety measure
In case you’re anticipating uncovering your yard in any capacity whatsoever, you will need to know where your water pipes are.
Without knowing this information beforehand, you simply increase the risk that you might damage the lines, which can flood your yard or your whole home, and the result is you might lose a ton of cash.
There are easy ways to discover underground water pipes in your front or back yard with complete accuracy and precision, and that’s what today’s review is all about.
Homemade underground pipe locator
The best way to locate these lines is via the use of a utility locator. So what is a locator, you may ask? Well, this is a device that can either be attached directly to the line for easy detection.
Or, of course, if it is harder to establish a direct connection to the line, the locator has to be accentuated with the aid of a transmitter that will send out a frequency into the ground.
This frequency that has to be carefully selected is then re-directed by the utility to get an accurate map of the water lines below the ground.
This would be impossible without the aid of a high-frequency emitting transmitter that induces a signal.
Here are some useful tips and steps that you should adhere to when using a locator
The first step is to, of course, figure out what kind of pipe locator you should buy, and this will depend on the kind of pipes you have in your yard. This may be for plastic or metal pipes.
This also takes into account where you’re searching for your underground water pipes; just as it looks at what territory you live in, they might be made of either sort of material.
In case you are unsure, then you might have to buy a locator that works for both materials.
Then you need to set up your line finder as the instructions say. How you do this will rely upon what kind of finder you own.
For instance, certain line locators work by emitting a noise when they stumble upon a line. While others make use of a screen that shows indications you are over a line.
The last step is easy. Just as you use a metal detector to locate hidden treasures below, your line locator will beep or light up when you find a water pipe.
All you have to do is keep aiming it towards the yard or ground.
Homemade underground pipe locator
Related Guides
