Frigidaire Upright Freezer Troubleshooting

Frigidaire Upright Freezer Troubleshooting. Most issues with an upright freezer can be easily identified and repaired.

While you can execute most repairs by Do It Yourself but sometimes you’ll need the services of a professional expert if the task includes working with refrigerants.

Always remember that this type of service can only be done by a certified technician who has experienced working with refrigerants. Now let’s see some important dimensions when the freezer does not work properly.

Frigidaire Upright Freezer Troubleshootingfrigidaire upright freezer troubleshooting 2021

Freezer Isn’t Working

Before inspecting the internal wiring and components of any device that won’t start, search for apparent problems such as an unplugged power cable, burnt fuses, or a circuit breaker that has tripped.

Many factors can prevent a freezer from turning on, including a defective cold control or thermostat, defective starter relay, malfunctioning defrost timers, or malfunctioning compressors.

The best approach to test a starter relay in a modern refrigerator or freezer is to use a known good one as a replacement.

The start winding and the run winding are both found on compressors.

The compressor won’t run if one of these connections opens up.

Similarly, blocked rotor shafts will render the freezer useless.

If your compressor needs to be replaced, make an appointment with a certified worker to get it fixed. In addition, the freezer will not work if the cold control or defrost timer is stuck in mode.

Locating Components

In the case of a freezer, there are diagrams attached to the appliance’s back or to the interior of the compressor compartment. It’s easy to see how things work when you look at a schematic diagram.

The actual position of the parts inside the freezer box is depicted in the pictorial diagram.

The Freezer is not Getting Cold Enough

This issue might be the result of a faulty cold controller or a malfunction with the refrigeration system. Like a thermostat, cold control regulates the flow of electricity to the compressor.

It is possible that the thermostat’s bimetallic spring can be weakened, which allows it to open early and turning down the compressor before the predetermined temperature has been achieved.

Turn off the freezer’s cold control and check whether it gets even colder. If it doesn’t work then call a technician to check the refrigerant levels and temperatures.

So, How To Do Frigidaire Upright Freezer Troubleshootingcheck the evaporator fan motor

Check the Evaporator Fan Motor

You can check if the evaporator fan motor is working properly by opening the freezer’s door and pressing the door switch. Open the freezer door, and the fan will stop.

When the switch is turned on, it should start running even if the door is left open.

It’s important to note that if the motor doesn’t start after activating the switch, it’s either broken or to need of replacement.

Check the Start Relaycheck the start relay

Remove the freezer’s electrical power cord from the socket. Then, remove the compressor’s start relay and check for continuity between the start and run terminal sockets.

Replace the relay as soon as feasible if it loses continuity or has a burnt smell.

Check the Condenser Coils

It’s a good idea to look under or behind the freezer for the condenser coils to see if they are dusty. If they’re dirty, scrub them down and give them a good brushing to eliminate any remaining dust.check the condenser coils

This will assist the freezer’s coils to transfer heat efficiently, allowing it to cool and freeze.

Check the Evaporator Coils

Ensure that there is no frost or ice on the evaporator coils located behind the freezer’s inner back panel. If they’re frozen, remove the ice with a hairdryer or a safe heat source such as a defrosting tool.

If your freezer defrosts automatically, check for defective components in the defrost system.

Check the Temperature Control Thermostatcheck the temperature control thermostat

Turn the thermostat from the lowest to the highest setting to see whether it works.

If you hear a click, your thermostat is functioning properly.

It’s possible that the thermostat is not working well if you do not hear that click.

Check the Condenser Fan Motorcheck the condenser fan motor

Test the condenser fan’s blades to determine if they are spinning smoothly. If they do, the motor is most likely in good working order.

The motor’s bearings may be worn if they don’t spin freely.

Test the motor for continuity using a multimeter to be sure. If there is no continuity, the cooling fan motor should be replaced.

Conclusion

Getting a home warranty plan will help you to avoid the worry and expensive costs that come with having a problem with your home appliances.

The better you take care of your freezer, the better it will take care of your food. Here are the answers to commonly asked burning questions regarding how to frigidaire upright freezer troubleshoot and you’ve gotten an overview of everything freezer-related.

Have a chilling fun!

Frigidaire Upright Freezer (Not Freezing)

Frigidaire upright freezer not working after power outage

Related Guide

Leave a Comment