Ariens snowblower won’t start. Before it starts snowing, ensure that you’ll be prepared for the first snowfall.
Because if you discover a problem with your unit today, you have always had time to have it serviced by an authorized Ariens dealer without having to compete with the rest of your neighborhood for a mechanic.
You’ll thank us for this advice, no matter how silly it may seem to haul your Ariens snowblower onto the driveway and fire it up on a mild October day.
Ariens snowblower won’t start
Starting the engine is the first step in prepping your snowblower for the season.
Too frequently, homeowners don’t realize they have a problem with their snowblower until it’s too late in the middle of a blizzard.
It’s the main reason we advise our customers to start using their snow blowers as soon as possible.
Problems and their Solutions
Here come some troubleshooting hints that may help you save a lot of time. Work your way down the list using the process of elimination until your startup issue is resolved.
If you’re unsure about your capacity to complete these activities without endangering yourself or your property, have your system serviced by an expert.
There are a few things you may do if your snow blower will not start. First and foremost, thank you for heeding our warning. Second, don’t be too concerned.
This might be caused by several simple problems, especially if your engine was working OK after last season.
Whatever the issue is, let’s analyze it together and fix it immediately, so your snowblower is ready for the upcoming snowstorm.
Ariens snowblower Spark plug may be defective
Do you comprehend what a spark plug is used for? It’s the tiny device in your engine that generates a spark, which ignites the gasoline in the engine, causing combustion and causing the engine to do its job work.
- If your spark plug becomes “fouled” with oil or carbon deposits, it may be unable to create a spark, preventing the engine from starting.
- It’s simple to get to a snowblower engine spark plug.
- Before beginning servicing, stop the unit, remove the key from the ignition, and wait for all moving parts to cease and hot parts to cool.
Review the safety information in your unit’s operator’s manual as well as the engine manual. Then, on the engine, locate the wire, sometimes known as the spark plug “boot,” and pull it away from the spark plug while unscrewing the spark plug of the engine.
Blockage in the fuel system
This is, unfortunately, the most prevalent cause of a snowblower not starting. Snowblowers of any brand that were not emptied and/or stabilized after the previous season is in danger of failing to start because old fuel can either:
- It will degrade and lose its flashpoint, which means it will not ignite.
- It will oxidize and gel, clogging the fuel lines and carburetor.
- Though old gasoline may be readily emptied from the fuel system, blockages are more difficult to remove.
- Fuel in carburetted (non-EFI) snow blowers goes via the tiny hole illustrated below.
It makes no difference what brand of snow blower you have; even the tiniest particle obstructing the carburetor jets or fuel lines stops fuel from reaching your engine, preventing it from starting or operating.
Carburetor clogged
The carburetor may be clogged. The most typical cause of a blocked carburetor is keeping gasoline in the snowblower for an extended period.
Some of the fuel’s components may evaporate over time, leaving behind a thicker, stickier material.
This sticky gasoline might block the carburetor and make it impossible for the engine to start. In case of blocking, use a carburetor cleaner to clean it.
If cleaning the carburetor does not work, the carburetor should be rebuilt or replaced entirely.
Fault in the ignition coil
While the engine is operating, the ignition coil transfers electricity to the spark plug. The engine may not start if the ignition coil is faulty.
- Make sure the spark plug is in good operating order before replacing the ignition coil.
- After you’ve established that the spark plug is operating properly, use an ignition coil tester to check the ignition coil.
- Go for the replacement in such a case.
- The recoil spring recoils the starting rope onto a pulley when it is pushed and released.
- The rope will not be able to rebound onto the pulley if the recoil spring is damaged.
As a result, the vehicle’s engine will not start. Someone may replace separately several recoil springs, however replacing the entire recoil starter system may be easier. Read also Kohler Engine Troubleshooting no Spark.
Ariens snowblower won’t start
Related Guides
