Whirlpool Cabrio touch screen washer reset

Whirlpool Cabrio touch screen washer reset. The Whirlpool Cabrio is a range of exceptional washing machines and dryers from the Whirlpool brand, and they come with so many appealing features, which is why they are super popular as well.

These features include amazing dirt sensors, energy-saving features, a motor with quiet operation, steam settings, a variety of temperature and time cycles, and of course, a wonderful and user-friendly touch screen.

While you probably won’t face problems with your washer and dryer regularly.

Sometimes issues might arise with the normal cleaning cycle, and this will mostly be easily fixed if you reset the washer. This resetting and troubleshooting will be effectively managed via the touchscreen.

Whirlpool Cabrio touch screen washer resetWhirlpool Cabrio Touch Screen Washer Reset

Always turn the device off. This is the most important step to reset the Whirlpool Cabrio washing machine’s touchscreen.

Of course, the biggest reason for this is to ensure that you are safe and there is no risk of any parts short-circuiting. Simply turn off the main electricity supply or remove the plug.

Check the modesWhirlpool Cabrio Washer’s Touchscreen Not Working

Next, once the washer is switched off, you can simply look at the different modes and figure out which one you need to set.

If you are confused about where to do this simply check the mode selector, which are several different buttons on the interface.

Check the dial

Making sure that you check the dial is vital. This is kind of tricky, but as long as you effectively turn the dial counter-clockwise to the left once, thrice to the right, then counterclockwise, one click to the left, and finally clockwise again once to the right, it should be fine.

Proceed to restart the device

Once you have done these steps, you can now move on to restarting the device itself. This can be managed by pressing the start button.

You might have to turn the machine off and on a few times. Make sure to rotate the dial in the correct order, as mentioned above. Then unplug the device for a while and proceed to reset the machine.

Whirlpool Cabrio washer’s touchscreen not workingWhirlpool Cabrio Washer’s Touchscreen Not Working

If in case your Whirlpool Cabrio washer’s touchscreen itself is not working, then you might have a serious issue such as a clog in the pump or drain area.

You can choose to either clean the clog manually.

However, if you feel like this has not solved your problem, you might want to look into replacement options as well.

Washer itself won’t pump water

If you can see that the motor is running perfectly fine, but the washer itself won’t pump water out, then your washer probably is suffering from a clogged or faulty pump pulley.

The easiest way to deal with this issue is to either get a professional to look into the issue or, if the issue persists, simply replace it with a new one.

Whirlpool Cabrio touch screen washer reset

Related Guides