Water not staying in toilet bowl

Water not staying in toilet bowl. Toilets are a very basic part of the home and toilets make life easier if the system installed in them is professional at working properly.

But if they stop working properly and if the toilet bowl stops holding water then it is going to be a hurdle because if you will not set up this problem then it is going to become a big problem in the future.

Toilets are the most used part of homes and if something goes wrong with them then that thing can get even worse over time if we will not pay proper attention.

A normal person flushes the toilet 5 times a day but if guests come over, then it is going to be more like over than 5 times.

This order will surely be going to decrease the amount of water that flushes on and off. and sometimes your water produces fluctuation in the toilet bowl and the toilet bowl stops holding water.

If you’re thinking about calling a professional about this problem, then stop. Because we don’t want that a plumber can drain a heavy amount of money from your pocket for the simplest possible task that you can do yourself.

But you can’t do it yourself properly. You have to follow up on the guide that we are providing you in this article.

Water not staying in toilet bowl

water not staying in toilet bowl

Before starting the fixing process, you have to identify the problem and then find out its solutions.

Reason 1: Vandalised fill tube

The fill tube mostly comes in black color or it could be transparent and it has a small adjustable hole.

It connects with the broader tube all around the toilet tank and workers flow the water from the toilet tank.

Drop it into the toilet tube then if something goes wrong with the vandalized fill tube it is surely going to disturb the water flow in the toilet bowl and the toilet bowl will prevent itself from flowing water.

Reason 2: Clogged Vent Lines

.If vent pipes get blocked due to many reasons like birds nest or some branches, they will make a place to put up pressure vent pipes.

Due to pressure, they will get cracked up and water will make its way through the leaks and ended up leaking through the toilet bowl. The main job of vent pipes is to reduce exposure to sewer gases.

Reason 3: Broken Toilet Bowl

This is the most common problem of yours, the problem of water not staying in the toilet bowl, and the reason is broken toilet bowl.

If water is leaking right onto the floor of your bathroom and then the bowl of your toilet may be broken.

Reason 4: Broken Fill valve

broken fill valve

fill valves work to regulate the water in your toilet bowl and if it gets broken or damaged then it is also surely going to disturb the water flow.

Solution 1: Cross out Damaged fill tub

If the tube is just disconnected then you just have to connect it back by simply putting it on the cylinder and then joining it be its place, and if the tube is broken or damaged then you have to replace it with the best possible match.

Solution 2:  Replacing cracked and damaged toilet bowls

If you feel like your toilet bowl is cracked then you have to replace it, but before that, you can try any sealant substance that can do its job.

Applying sealant is going to be a temporary fix and at the end of the day, you are surely going to replace the cracked and damaged toilet bowls.

Here are a few steps that you can follow up on and can replace the toilet bowl. But before starting the removal process, you will need these supplies.

Things you’ll need

  • pair of plumbing gloves
  • putty knife
  • bucket
  • sponge
  • wrench
  • soft towel

Steps

  • Remove the excess water: the first step that you have to take is to remove the excess water and turn off the main water supply valves and then drain excess water through the tub with the help of a sponge.
  • Place a Bucket Down: place a bucket down so that it can catch excess water.
  • Loosen the nuts: loosen the nuts, but don’t forget to wear a pair of gloves, and then loosen the nuts and then lift the bowl in the upward direction by applying a very minimal force.
  • Lay down a piece of towel: place a piece of cloth down the hole so that any sort of excessive nuts can’t lose anything.
  • Remove the Sealent: then remove the sealant that is placed in the form of a wax ring that you can remove with the help of a putty knife
  • Remove the : the final step is going to be to remove flange the and then you are done removing the toilet bowl.

Warning: 

If you feel stuck anytime in replacing a toilet bowl, then feel free to call a plumber and get professional help.

Related Guides

Leave a Comment