How to make led lights stick. If you are seeking accurate instructions, install LED strip lights to make your living area much more attractive and unique, then it must be a good idea to get a change less expensively.
At first, it looks easy to stick led strip lights with their sticky back side. But it doesn’t have a strong adhesive backing that can stay long on the wall.
If you already have the experience of loosening led strip lights and want to know the reasons for their weak grip, then you may follow us to resolve the issue.
Even if you are patching the strip LED lights for the first time and want to mount them for a longer time, we can help you with our honest tips and tricks.
This article will help you determine how to make led lights stick on the wall and what you need to do as initial preparation to mount led strip lights without getting loosened.
How to make led lights stick
Guideline About Sticking LED Strip Lights
We will discuss how to make LED lights stick on a surface and what kind of material you can use to stick LED strips firmly.
We will also discuss what instructions you can follow to make perfect sticking and prevent the unhook of LED strip lights. Let’s start going the way.
1. Instructions As Initial Preparation
Before starting any practical task, we have some suggestions that may help your LED strip lights from falling and keep them persistent on the spot for a long time.
LED Strip Lights Strong Adhesive Backing
The first step you must take care of is buying the LED strip lights.
If you don’t want to use any additional gadgets to mount your LED lights, then ensure that you purchase lights with strong adhesive backing.
If your LED light strip owns a less powerful adhesive back that it might fall after some time.
So, if you don’t purchase lights yet, we suggest you buy strip lights with strong adhesive backing. The simple solution is to use hot glue.
If you have already purchased the lights with low back adhering power, then don’t tense yourself as we have alternative methods to do your sticking light task.
Check Moisture or Dampness
The next step to check for perfect installation is moisture or dampness on the surface. You must clean the moisture if you want a strong patch-up of your LED lights strip with the surface.
Wetness is a hurdle between the surface and the strip, making your adhesive backing fails. So, it would help if you inspected that the surface is dry and that no moisture existed, which becomes a hurdle in your hard work.
Clean lubricated Wall
Another tip we want to give you is to inspect the oily surface before attaching the light strip. You may ruin your efforts while trying to adhere to light strips.
You may initially successfully attach the lights, but they can’t stay longer on a grease wall or surface.
So, while preparing your surface, you must be concerned about this fact.
We are not sure what location you have chosen for LED lighting, but this situation mainly occurs if you plan to stick the LED light strips in your kitchen.
You may use rubbing alcohol for the oily surface.
Check The Dust or Rust On Surface
The following tip is related to the cleaning task.
If you are getting ready to stick the LED strip lights, it would be best if you get a surety of cleaned walls or any surface you choose for lights.
Ensure that the surface is free from rust, dust, or smut to stop led strip lights from dropping down.
Clean the outer skin with clear ties and a cleaning agent or warm water if you find anything unpleasant, or use a duster or a cloth for dusting.
Ensure Flat Surface
If mounting LED strip lights is your area of interest, or you are obsessed with the lighting, you don’t want them to wear out.
You may do your best to get excellent results not just for a short period but for a long time as nobody wants to empty his pockets on the same thing and efforts.
So, we are sharing our honest views to save your assets. So, you must ensure a smooth surface for sticking LED strips.
If you have a metal surface or woody skin, you may use adhesives to get a firm hold and a stable outcome. You may also use adhesives for the textured surfaces.
If you are not comfortable with the LED tape backing bond or want additional methods for solid mounting, then we have a few alternative methods so stay with us for much more tips.
2. Different Methods For Mounting LED Light Strips
Here is a variety of methods that you can use to stick LED strip lights.
Whether you want to use these methods while installing the LED strips or use them in case of toppling over is your choice.
Now, it’s time to get to know about those valuable gadgets.
Use of Mounting Channel
So the first helpful tool that you can use for mounting your LED strip lights is mounting channels. It is one of the discounted ways used for a firm grip.
You can use the aluminum channel to give your lights an efficient look on any surface. Please use the combo of mounting channels and LED strip light adhesive backing.
You may buy mounting channels in half or a full meter and can cover the LED strips up to 10 millimeters in diameter. It never gets proponent after installation, so don’t worry that it can dull the beauty of your
Use of Staple Gun
The next option is using a staple gun. If you already have a staple gun, it would be best to use a staple gun to stick led strip lights. Just place the strip and staple.
But be careful while stapling the strips to prevent damage to the wiring of the lights.
It would be best to use crown shaped staple. It may stick the LED strips without harming insulation.
Use of Mounting Clips
Another way that is very effective and budget-friendly is using mounting clips. If you want to mount LED strips using clips, you may get a firm grip of the stick on the wall.
These clips contain a screw that helps the LED strips hang on their spot. They come in a pack of 15 and only cost you almost 2 dollars.
You may get estimate the quantity by calculating one clip for one foot.
Mounting brackets are also well suited for the area where downward sticking is the requirement of the surface.
Use of Double-Sided Tape
Some users don’t want any screwing or clipping their LED strip lights, so for those people, we have another way of sticking lights which is double-sided tape.
If you want to use it, you may purchase it in ft. Usually, the LED strips own weak adhesives that don’t stay for a long time.
But using double-sided tape is a better alternative for it. Just buy, patch, and press as it is also well suited for high temperatures areas, e.g., kitchen.
Use of Mounting Hooks
You can use mounting hooks to accomplish the task if you want to stick LED strip lights. There are two types of mounting hooks.
The one has an adhesive back with detachable saran wrap, and the second needs a screw to attach to the surface.
The mounting hooks come in a pack of 15 and may cost you almost 2 dollars. You can use one hook per foot. So you can estimate the packs of hooks you are required.
Use of Mounting putty
Another way enables you to stick LED strip lights on your surface. If you don’t want to use a screw, staple gun, or adhesive, mounting putty is an option.
Using putty is effortless; you may give any pattern or shape to the putty with your hands and then patch it behind your LED strips.
Then you can stick the strips to your desired surface.
3. Installation Procedure Sticking LED Strip lights
We have already discussed the initial preparations and the different methods to get easy fixes for your LED strip lights. It’s time to go through the way of the installation process.
LED Strips Measurement
The first step is determining the desired position for sticking LED strip lights.
After that, you must use a measuring tape to calculate the required quantity of LED light strips.
Ensure that you have an exact digit of the needed length.
But here is a suggestion while adding LED lights to the cart, it would help you if you order an extra foot to avoid any storage while applying lights.
Cut Down The LED Strip Lights
The next step is optional, or you can say that it depends on the situation. If you feel the need to cut down the LED strip lights, you may proceed with this step.
You may use a sharp knife or any other sharp tool like a scissor to cut the strip. But one thing that you need to be concerned about is don’t cut the strip lights from anywhere.
It may damage the LED wiring or connections.
So to tackle the cutting, you must check for cutting marks on the strip. Cutting from the designated lines would be better to prevent any damage.
But in the case of cutting from the middle, it could be possible that a few LED lights get affected and stop working. So you need to soldering iron to make a connection.
Place LED Strips On Desired Position
Please prepare your surface for mounting the strip lights. If you have not yet prepared, prepare your surface and proceed to the step.
There are four methods according to the mounting materials or adhesives. You may pick your ones according to your surface condition.
- It is an easy task if you want to use LED strip lights with back adhesive. You must remove the back detachable plastic wrap, place it on the correct spot, and press it.
- If you have chosen a way of mounting channels, you must first fit the LED light strips into aluminum brackets or tacks.
- Don’t remove the back cover once, but with the process. If you peeled off the plastic cover, it might lose its adhesive stability.
- After fitting, you can place the mounting channels on the wall or any other planned surface.
- If you want to use hot glue, putty, or double-sided tape, you must attach the material to the back of the LED strips and then place the strips on the surface.
- Other helpful mounting methods like hooks, small clips, or staple guns are used as the process goes on.
Attach With a Power Source
Here is the final step of attaching the power supply when you have done that mounting process. After that, you must provide power supplies for the LED strip lights.
Attach the LED cable ends to the power supply and Flick it on. We are sure the light will turn on after accessing the power supply.
In this post, we have shared all the possible content that may help you to stick LED lights on the surface.
We share different ways for mounting the LED strips and give you a choice to choose the most suitable and affordable way for you.
You may do easy fixes on any surface, even on textured surfaces, uneven or concrete walls. You may tackle LEDs in any situation with the help of our guidelines. Have good luck.