Fresh air input on heat pump

Fresh air input on heat pump. A heat pump is a device that is used to pump heat. It has very simple working. It blows the air after collecting it from the outside.

A heat pump uses a warm type of air to suck the available moisture in your clothes, and this is actually just to dry your clothes off after you have washed them.

The air inside the pump is passed through an evaporator that is used to remove the moisture. The air is collected there, and then it is stored in a tank.

It is a very beneficial device that saves both time and money. It can be easily located in nearby electronic stores and can be purchased easily as well.

Fresh air input on heat pump

fresh air input on heat pump

In actuality, there is no input of fresh air inside a heat pump. It is closed, and it only uses the air from it to dry the clothes. The air coming out of the pump is not very fresh either.

This is because it is warmed, and then the pump blows it out of itself. Thus output not being fresh as it has been merged with great, and the fresh air is supposed to be cool.

Types of heat pumps and their inputs

There are three main or major types of heat pumps used these days. Whether they take fresh air as input or not is also listed below.

And if they do take air input, the ways are briefly listed down below:

Input of air in the water source heat pump

These are the first type of heat pumps. They give warm water as output. They use gas or heat to warm the water, and then they push it outside.

There is no input of fresh air in this type of pump as they are to give water as output and not air.

They do take some air inside to push the water, but the air they take is usually the air near the pump, which is certainly not very fresh.

Fresh Air in geothermal heat pump

This type of heat pump uses geothermal energy. It uses the energy trapped in the death given by the sun, meaning it uses solar energy that is stored in the ground and then uses the energy to warm the pipes.

The pipes are connected to a pump. The pump rotates and gives warm air or water as you have ave installed as a result.

In this type of heat pump, the input of air is not fresh t all either. The output, as merged with warm air or water, is not fresh either.

Fresh air in an Air-to-Air heat pump

This is the third and the most common of all types of heat pumps. This type of heat pump uses air as an input and gives air as the output as well.

The air input in it is usually not fresh, but it is not entirely impossible to take fresh air as input. The output it gives is obviously not fresh.

As I have mentioned before that the air given or the air which results from the output is heated, thus making it water. So the air given from this type of heat pump is not fresh either like the other pumps.

Way to insert fresh air into a heat pump

way to insert fresh air into a heat pump

There are not very numerous ways to give fresh air to a pump as input. But there is one way to do this, and it is considerately very easy. You can do what you desire.

As I have already explained that the air heat pump uses the surrounding air. It absorbs the air and takes it as its output.

We just simply need to change the environment or place where the heat pump is installed.

You just have to look for a place where fresh air is present, like the outdoors. Just use the heat pump there, and you will have fresh air as input.


The main advantage of fresh air as input in a heat pump is that the old and nonfresh air is diluted in your indoors, and you can have a better feel.

It also pressures the pump, making it give better output. It keeps the heat pump in a better condition than before.


The use of fresh air in a heat pump is to our advantage. It can affect our surroundings and make it better.

The working and type of the heat pump have been discussed above as well.

Related Guides